2014 RAM ProMaster 3500
Mileage
148,539
Service Date
12/6/2024
Services Performed
- FOUND: lower control arm bushings are torn in the rear recommend replacing axles both front see if it solves vibration need to start there for since tires were balanced multiple times with more of the vibration under acceleration
- FOUND: a lot of noise only in Drive can see torque converter shifting in Drive possible crack flex plate or possible cracked torque converter
- TRANSAXLE ASSEMBLY – Removal & Installation – Gas/Ethanol – [Includes: Perform Relearn procedure.]
- (Combination) – FLYWHEEL – Remove & Replace Gas/Ethanol
- CONTROL ARM – Remove & Replace – Lower,Both – [DOES NOT include alignment.]
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both Sides – [DOES NOT include disassemble or alignment (where applicable).]
- ROAD TEST VEHICLE. CHECK ALL SUSPENSION AND STEERING PARTS FOR WEAR. CHECK TIRE PRESSURE AND CONDITION. CHECK RIDING HEIGHT. CHECK ALIGNMENT OF ALL FOUR WHEELS. ADJUST CASTER, CAMBER, TOE-IN, AND THRUST ANGLE AS NEEDED ON ALL FOUR WHEELS. CENTER STEERING WHEEL.
Calvary G. gave our service a 5 star review on 12/6/2024
